NAZI BELL

• Posted by REV. ANDRE G. DENIS D.D. March 19, 2013 - #PHEASE 11  - 1,044 views
  Nazi Bell, behind the Myth ...!
  Put most simply the Nazi Bell was in fact a heavy particle accelerator used as an artificial neutron source to breed Protactinium 233 from Thorium 232. Protactinium would naturally degrade after 27 days into pure bomb grade Uranium 233,. Uranium 233 derived from spent reactor waste is often contaminated by Uranium 232 when Thorium 230 gets bombarded by a second neut...ron, but in a particle accelerator this process does not have time to occur and thus U232 contamination is as low as one part per million and thus as safe to handle as weapons grade Plutonium. According to speech notes recently uncovered in KGB archives, Heisenberg advocated harvesting Protactinium for a nuclear weapon at the Harneck Haus conference in July 1942. Later whilst interned at Farm Hall Cambridgeshire after the War, Heisenberg also identified harvesting Protactinium as one of three methods of obtaining fissile material for a nuclear bomb. According to speech notes recently uncovered in KGB archives, Heisenberg advocated harvesting Protactinium for a nuclear weapon at the Harneck Haus conference in July 1942. Later whilst interned at Farm Hall Cambridgeshire after the War, Heisenberg also identified harvesting Protactinium as one of three methods of obtaining fissile material for a nuclear bomb. According to speech notes recently uncovered in KGB archives, Heisenberg advocated harvesting Protactinium for a nuclear weapon at the Harneck Haus conference in July 1942. Later whilst interned at Farm Hall Cambridgeshire after the War, Heisenberg also identified harvesting Protactinium as one of three methods of obtaining fissile material for a nuclear bomb. The other two of course, being to either enrich U235, or to reprocess Plutonium from spent fuel in a thermal nuclear reactor... Our history books tell us all about these other two methods in Nazi Germany but are strangely silent on the Protactinium harvesting project. Why is that?,. The wartime Chairman of AEG, Herman Bucher revealed to OSS informant Erwin Respondek that his company was funding development of a Heavy Particle Accelerator for the Atomic Bomb Project at Bisingen. The process harnessed the fluorescent quality of Mercury to cause collisions between electrons and photons, which in result released thermal neutrons. The device was surrounded by a concave beryllium mirror to reflect neutrons back into a mass of Thorium oxide placed at the core. The machine generated this X-ray plasma in orbit around an axle which spun two carefully frequency phased contra-rotating drums. Respondek also revealed to the OSS that Heisenberg worked closely with Swiss engineer Dr Walter Dallenbach at a secret facility known as "Forschungsstelle D" at Bisingen to develop the Nazi bell. A report by the OSS in November 1944, cited information from an engineer named Nagglestein who related Otto Hahn's laboratory at Tailfingen in a town close to Bisingen was using Thorium to obtain Uranium for an Atomic Bomb. Nazi Bell, behind the Myth . In August 1997 a Polish Intelligence officer with access to Polish Government documents made writer Igor Witkowski aware of the Nazi Bell. Original documents came from war crime interrogation of former SS Lt General Jakob Sporrenberg after the war. According to Witkowski whilst working as a military journalist, an undisclosed member of Polish military intelligence showed him some interesting documents. Witkowski received discreet access over a period of a month during which he transcribed files by hand. These documents have not been independently verified, however there are several less well detailed corroborations of the Bell project from entirely different sources. Leader for the Bell project was Prof Walther Gerlach, who was also the leader of Germany's Uranium project from January 1944. It's logical to assume therefore that the Bell was part of Nazi Germany's Atomic weapons project. Witkowski read from Sporrenberg's depositions for his War Crimes trial of a centrifuge device shaped like a Bell with a hemispherical domed top. The outer Bell was made of three inch thick ceramic, much like a high voltage porcelain insulator. Said to be 9 feet in diameter and 12-14 feet high. It consumed prodigious amounts of electrical power and glowed violet-blue when operated for short periods. Inside the Bell was located two contra rotating drums. Norwegian born physicist Rolf Wideroe wrote in his autobiography about development of the Bell at Hamburg, by the company CHF Muller. In his patent his diagrams showed one sphere inside another spun on a common axle. As is common with particle accelerators a vacuum has to be created to propagate plasma inside these evacuated chambers. Then heated mercury vapour would have been bled into the cavity and then once spun up subjected to powerful discharges of electricity to ionise the Mercury. Under this influence the Mercury would fluoresce and photons would collide with extremely energetic electrons, creating Gamma X-rays. These X-rays in turn would stimulate the Beryllium oxide in the Xerum 525 to emit thermal neutrons. In turn these thermal neutrons would be absorbed by the Thorium 232 changing it into Protactinium 233. Wideroe called this device the Wirbel-Rohr, or Vortex Tube. Patents for variations on the same theme had been applied for in 1935 by both Prof Max Steenbeck and his rival Swiss scientist Dr Walter Dallenbach. After WW2 Steenbeck co-operated with the Soviets to replicate the Nazi Bell. The Soviets named it the Tokamak.,. The Bell concept exploited an even earlier patent. In March 1934 Hungarian scientist Leo Szilard applied for a patent which was titled "improvements in, or relating to the transmutation of Chemical Elements. His Patent described how radioactive bodies are generated by bombarding suitable elements with neutrons. Szilard went on to describe "such uncharged nuclei penetrate even substances containing the heavier elements without ionisation loss and cause the formation of radio-active substances." , [1] Mercury (alternate accounts say amalgams of Mercury) were spun inside these drums. In likelihood the Mercury was introduced from beneath as a heated vapour. Jelly like compounds of Beryllium with Thorium were located in flasks contained within the central axis. The Nazis were known to have made special paraffin from Deuterium (heavy Hydrogen) because of it's catalytic qualities in radioactive exchanges. Mercury also played a role by releasing photons into the plasma. It is the collision of energetic electrons with photons which gives off gamma radiation. Beryllium compounds used in the Nazi Bell were called “Xerum 525.” During WW2 Nazi scientists discovered paraffin was useful as a moderator in reactor experiments. Paraffin would fit the description of "Xerum 525" as a pinkish jelly like substance. Pink colour possibly came from the mixing of Mercury (II) Iodide also known as Red Mercury into the compound, thus by implication Xerum 525 most likely contained Beryllium and Thorium suspended in heavy paraffin....................